1000BASE-T Gigabit Ethernet Over Category 5 Copper Cabling
1000BASE-T Gigabit Ethernet over Category 5 copper cabling is an attractive option for network managers for several reasons. It addresses the exploding bandwidth requirements on current networks that are the result of implementation of new applications and the increasing deployment of switching at the edges of the network. Gigabit Ethernet leverages the organization’s existing investment in Ethernet and Fast Ethernet infrastructures, and it provides a simple, cost-effective performance boost while continuing to use the dominant horizontal/floor-cabling medium.
1000BASE-T is specified to run over four pairs of Category 5 balanced cabling. The 1000BASE-T standard leverages the existing cable infrastructure as it is specified to operate up to 100 meters on Category 5 cabling. The other key specifications of 1000BASE-T make it a cost-effective, non-disruptive, and high-performing technology. First, it supports the Ethernet MAC, and is thus backward compatible with a 10/100 Mbps Ethernet. Second, many 1000BASE-T products will support 100/1000 auto-negotiation, and therefore 1000BASE-T can be incrementally deployed in a Fast Ethernet network. Third, 1000BASE-T is a high-performing technology with less than one erroneous bit in 10 billion transmitted bits. This bit error rate of less than 10 – 10 is the same error rate as that of 100BASE-T.
- Exploding bandwidth requirements
New bandwidth-intensive applications are being deployed over Ethernet and Fast Ethernet networks. These applications include the following: Internet and intranet applications that create any-to-any traffic patterns with servers distributed across the enterprise, and users accessing web sites inside and outside the corporate network; these applications tend to make traffic patterns and bandwidth requirements increasingly unpredictable. Data warehousing and backup applications that handle gigabytes or terabytes of data distributed among hundreds of servers and storage systems. Bandwidth-intensive, latency-sensitive groupware applications, such as desktop video conferencing or interactive whiteboarding.
- Significant investment in Ethernet/Fast Ethernet infrastructure
Ethernet is the dominant, ubiquitous LAN technology. According to industry analyst International Data Corporation (IDC) in Framingham, MA, more than 85 percent of all installed network connections were Ethernet at the end of 1997, representing more than 118 million interconnected PCs, workstations, and servers. The deployment of Ethernet/Fast Ethernet networks involves investment in network interface cards (NICs), hubs, and switches, as well as in-network management capabilities, staff training and skills, and cabling infrastructure.
- A simple, cost-effective performance boost on existing Category 5 cabling
1000BASE-T offers a simple, cost-effective migration of Ethernet/Fast Ethernet networks toward high-speed networking and also has the following benefits: 1000BASE-T scales Ethernet 10/100 Mbps performance to 1000 Mbps. 1000BASE-T is the most cost-effective, high-speed networking technology available now. 1000BASE-T leverages existing, proven Fast Ethernet and V.90/56K modem technologies and will experience the same cost curve as the Ethernet/Fast Ethernet technologies. 1000BASE-T is significantly more cost-efficient than 1000BASE-SX (Fiber Gigabit) among all LAN technologies. 1000BASE-T preserves Ethernet equipment and infrastructure investments, including the investment in the installed Category 5 cabling infrastructure. There is no need to undergo the timeconsuming and high-cost task of replacing cabling located in walls, ceilings, or raised floors.
Fiberstore’s 1000BASE-T copper small form pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.3. For instance, HP J8177C X121 compatible 1000BASE-T SFP copper RJ45 transceiver for 100m reach over Cat 5 UTP cable uses the SFP’s RX_LOS pin for link indication and supports 1000BASE-T operation on the host system. Another example is Brocade XBR-000190 compatible 1000BASE-TX SFP copper RJ45 transceiver which offers the same function with Brocade E1MG-TX/XBR-000190 and fully compatible with Brocade devices.