40GBASE-SR4 QSFP + Transceiver Overview
QSFP+ interfaces a network device motherboard (for a switch, router, media converter or similar device) to a fiber optic cable. It is an industry format jointly developed and supported by many network component vendors, supporting data rates from 4x10 Gbit/s. The 40GBASE QSFP+ modules offer customers a wide variety of high-density 40 Gigabit Ethernet connectivity options for data center, high-performance computing networks, enterprise core and distribution layers, and service provider transport applications.
The IEEE 802.3ba committee ratified the 40 Gigabit Ethernet standard and along with the general specification, defined a number of fiber optic interfaces. The 40G QSFP+ standard interfaces include QSFP-40G-SR4, QSFP-40G-CSR4, QSFP-40GE-LR4, etc. The following part will mainly introduce the 40GBASE-SR4 QSFP+ transceiver.
The 40GBASE-SR4 QSFP+ transceiver modules support link lengths of 100m and 150m respectively on laser-optimized OM3 and OM4 multimode fibers. It primarily enables high-bandwidth 40G optical links over 12-fiber parallel fiber terminated with MPO/MTP multifiber connectors. And also, it can be used in a 4 x 10G mode for interoperability with 10GBASE-SR interfaces up to 100m and 150m on OM3 and OM4 fibers respectively. The worry-free 4 x 10G mode operation is enabled by the optimization of the transmit and receive optical characteristics of the QSFP-40G-SR4 to prevent receiver overload or unnecessary triggering of alarm thresholds on the 10GBASE-SR receiver, at the same time being fully interoperable with all standard 40GBASE-SR4 interfaces. The 4 x 10G connectivity is achieved by using an external 12-fiber parallel to 2-fiber duplex breakout cable, which connects the 40GBASE-SR4 module to four 10GBASE-SR optical interfaces. Below is a picture of 40GBASE-SR4 QSFP+ transceiver.
40GBASE-CSR4 QSFP modules extend the reach of the IEEE 40GBASE-SR4 interface to 300 and 400 meters on laser-optimized OM3 and OM4 multimode parallel fiber, respectively. Each 10-gigabit lane of this module is compliant to IEEE 10GBASE-SR specifications. This module can be used for native 40G optical links over 12-fiber parallel cables with MPO/MTP female connectors or in a 4x10G mode with parallel to duplex fiber breakout cables for connectivity to four 10GBASE-SR interfaces. Cisco compatible QSFP-40G-CSR4 transceiver from Fiberstore is optimized to guarantee interoperability over the complete specification range of 10GBASE-SR.
As the leading and professional supplier in the optical communication industry, Fiberstore offers high quality 40G QSFP+ transceivers including 40GB-LR4-QSFP, QSFP-40G-CSR4, QSFP-40G-PLR4, QSFP-40G-SR4, etc. All these transceivers are 100% compatible with major brands like Cisco, HP, Juniper, Nortel, Force10, D-link, 3Com. If you’re connecting an optical jumper cable from the 40G QSFP+ transceiver module in a switch port straight to a server interface, you’ll need a brief cable using the correct cable connectors on each side. If you’re connecting a 40G QSFP+ transceiver module in a switch port to an optical connector termination for your data center or cabling closet, it will require a cable with different types of optical connectors on both ends.